Skip to content

Read PLC and CNC signals with OPC UA

Qynetic Edge polls selected OPC UA nodes on a machine or PLC. Each read includes a value, its quality status and the source timestamp when the server supplies one.

Choose the nodes and their meaning

Ask the controls engineer for the OPC UA endpoint and the NodeId for each variable. The name displayed on the operator panel may differ from the identifier used by the server. For each node, confirm the value type, engineering unit and what a change means on this machine.

Edge reads the current values at the configured interval. Use a sample mapping for a measurement and a counter mapping for an accumulating part count. A short pulse can occur between reads, so a controller-maintained counter is a better source for counting completed cycles.

Verify the server and the data quality

By default, Edge signs and encrypts OPC UA messages. The person responsible for the machine confirms the fingerprint of the server certificate before it is trusted in Edge. The server may also require approval of the Edge client certificate.

The local interface shows the source time when available, the observation time and the quality reported by the server. A non-good status appears in diagnostics and is excluded from production events. Check this status when a value looks plausible but has stopped changing.

Book a call about your factory

Tell us what you make and which machines you run, and we will walk through how Qynetic fits. If you would rather get news and early access, join the waitlist.