Skip to content

Qynetic Tool Manager

How does Tool Manager trace wear offsets?

In short

Qynetic Tool Manager keeps a site’s tool register, machine positions and wear-offset readings together. Starting with a position, an engineer can see the mounted tool, compare successive readings by axis and check whether a change matches values handed off through APC.

The problem it addresses

When a diameter starts to drift, a tool number by itself has little meaning. Position 5 on two machines can hold different tools. The offset now in the control can also differ from the one in use when the part was cut.

How it works

  1. 1Register the tool and assign it to its machine position. Upload the machine’s Actual TOOL.OFS readings so the axis values can be compared over time.
  2. 2Open the position to see the latest X, Z, Y and R wear offsets, the history for each axis and the difference between readings.
  3. 3Where a change exactly matches the before and after values of an earlier APC hand-off for that position and axis, follow the link to the proposal if authorised.

What to check in the records

  • Tool register

    Use code, type, description, status and mounted position to distinguish an available tool from one already in use or out of service.

  • Wear-offset history

    Look for a step between consecutive readings. Record the sampling times so a change can be compared with the part measurements from that interval.

  • Replacement decisions

    A wear offset is a compensation value. To judge how long an insert can keep cutting, also bring its cutting time, replacement criterion, measured dimensions and change history.

Relevant data

  • Machine positions
  • Actual TOOL.OFS files
  • APC hand-off records
Integrations

Common questions

Does an offset history predict the remaining tool life?

The module shows recorded offset changes. Estimating remaining life also requires evidence of how comparable inserts wore under similar cutting conditions, and a measurable replacement criterion.

What if no APC proposal matches a change?

The two readings still show that the offset changed. Check the local machine and operator records for the period between them to establish its origin.

Book a call about your factory

Tell us what you make and which machines you run, and we will walk through how Qynetic fits. If you would rather get news and early access, join the waitlist.