Skip to content

Learn

Traceability in manufacturing: lots, serials, genealogy

What traceability is, the difference between forward and backward tracing, what a production genealogy contains, how to test it, and why connected data makes it fast.

Published · Updated · 6 min read

What traceability is

Traceability is the ability to follow a product, a batch or a material through its history: what it was made from, how and where it was made, and where it was delivered. It is a requirement in many regulated industries and a practical advantage in all of them.

Two directions matter. Backward tracing starts from a finished unit and finds what went into it. Forward tracing starts from a suspect material lot or process event and finds every unit it touched.

Identification: lots and serial numbers

Everything starts with identity. A lot or batch number identifies a group made under the same conditions; a serial number identifies one unit. A serial number can distinguish one returned assembly from its neighbours. A lot number can identify all assemblies exposed to the same batch of raw material. Choose the level required by the product, contract and applicable rules.

Identity must survive the whole route. Labels, engraved marks, data matrix codes and RFID are common carriers, and the identifier has to be linked in a system every time the unit moves or is reworked.

What a genealogy contains

The genealogy of a unit is the record of everything that was linked to it:

  • Material and component lots, with supplier lot numbers
  • Machines, programs and tools used at each operation
  • Process parameters and relevant in-process measurements
  • Inspection results and the gauges used, with calibration status
  • Operators, shifts and the instruction or drawing revision that applied
  • Nonconformances, rework and dispositions
  • Packaging, release and shipment

Why connected data matters

When the record is assembled from paper, spreadsheets and separate systems, a trace takes hours or days and is easy to get wrong. When machine, measurement and order data are connected to the unit as they happen, the record builds itself and a trace is a query.

Time is part of the data. Clock differences between systems can put an event on the wrong unit, so timestamps need a recorded origin and a known accuracy.

Testing your traceability

Run a mock recall. Pick a material lot or a date and ask for every affected unit and every customer shipment. Measure how long it takes and whether the answer is complete. Repeat after changes to the process or the systems.

Suppose a suspect lot supplied 40 serialised units. You locate 26 in shipments, 10 in stock, two in rework and two recorded as scrap. The quantities reconcile to 40. Next check the individual serials for omissions or duplicates and link each shipped serial to its recipient.

Look for the usual gaps: supplier lot not captured at goods receipt, identity lost during rework, manual keying errors and operations done outside the system.

Standards and regulation

GS1’s Global Traceability Standard describes events such as receiving, transformation and shipping, and the data needed to link them. For medical devices, the US FDA distinguishes the device identifier, which identifies the labeler and model, from production identifiers such as a lot or serial number. Keep the production links that connect a specific shipment to its material history.

Standards and further reading

Book a call about your factory

Tell us what you make and which machines you run, and we will walk through how Qynetic fits. If you would rather get news and early access, join the waitlist.

Learn