Skip to content

Learn

Kaizen explained: continuous improvement on the shop floor

What kaizen means, the principles behind it (gemba, PDCA, standard work, waste), how daily kaizen differs from a kaizen event, and how it combines with Six Sigma.

Published · Updated · 6 min read

What kaizen is

Kaizen (改善) means ‘change for the better’. In manufacturing it is the practice of improving continuously through many small changes, rather than waiting for large projects. It grew out of the Toyota Production System and is a core part of lean.

The central idea is that the people closest to the work see the problems first, so everyone is expected to take part, not only specialists.

Principles

A few principles recur in every kaizen programme:

  • Go to the gemba: look at the real work, where it happens, before deciding
  • Standard work: write down the current best way, so improvement has something to build on
  • Plan, do, check, act (PDCA): change one thing, check the result, keep or adjust
  • Remove waste: anything that uses time or resources without adding value
  • Respect for people: those who do the work are the source of ideas

The seven wastes

Lean describes seven classic forms of waste, often remembered by the Japanese word muda:

  • Transport: moving material or parts more than necessary
  • Inventory: more material or semi-finished goods than needed
  • Motion: unnecessary movement of people
  • Waiting: people or machines idle
  • Overproduction: making more than is needed, or earlier than needed
  • Overprocessing: doing more work than the customer values
  • Defects: scrap, rework and inspection caused by errors

Daily kaizen and kaizen events

Daily kaizen is small, frequent and local: an operator suggests a change to a fixture, a team adjusts a layout. A kaizen event, sometimes called a blitz, is a short and focused effort, often a few days, where a cross-functional team improves one process and puts the result into use at once.

Both need the same discipline: a stated problem, a measured result and a decision about what becomes the standard.

During a changeover an operator makes four trips for gauges. The team tries a cart with a marked place for each gauge and times the next comparable setups, including restocking. If less time is needed overall and the gauges stay protected, add the cart check to the changeover instructions.

Kaizen and Six Sigma

Kaizen suits problems where the cause is visible and the fix is simple. Six Sigma and DMAIC suit problems where the cause is hidden in variation and needs statistics to find. Many organisations combine them as lean Six Sigma: kaizen to remove obvious waste, DMAIC for the stubborn problems that remain.

Data makes kaizen stronger. A suggestion that comes with a measured before and after is easier to approve, easier to spread to other machines and harder to forget.

Making it last

Typical reasons kaizen fades are that no time is set aside, that the people who made suggestions get no feedback, and that gains are not written into the standard. Visual management, short daily meetings at the line and a simple record of ideas and outcomes help.

Measure with the same definitions every time, for example OEE with fixed loss categories, so that a change is compared with the baseline instead of with memory.

Standards and further reading

Book a call about your factory

Tell us what you make and which machines you run, and we will walk through how Qynetic fits. If you would rather get news and early access, join the waitlist.

Learn